Autotronik Screen Printer

Screen & Stencil Printer

The inexorable trend toward sever finer structures and smaller components is increasingly perfect results as requirement. To reach this requirement, the quality of the end product is the same as the precision of the printing itself. JST is manufacturer of manual, semi-automatic and fully automatic stencil printers from Autotronik, which reach highest accuracy and for the operator easy to use. With our Stencil Printers, you will print precise and reproducible finest structures. Hereby the quality of our products as well as the ratio of costs to benefits will be in the foreground.

Manual Screen and Stencil Printer

Precise, reliable and easy-to-use Autotronik BS110 stencil printer is ideally suitable for the needs of prototype and low-to-medium volume production.

Fast print alignment and high repeatability
Applicable for most standard SMT screens/ Support frame types
Ready for double-sided PCB (Underside Clearance: 25mm)
Large print-area capability
Easy set-up and clean-up

MODEL: BS110 (Manual)

Download Brochure

Semi Automatic SMT Stencil Printer SP600 / SP600L

The models SP600 / SP600L are high precision semi-automatic SMT stencil printer with very large pressure fields. All printers are compatible with standard SMT frames with sizes from 350x350mm to 838x700mm.

Huge print area capability (350mmx350mm up to 736mmx736mm)
Vertical separation of stencil from PCB
- 4 corner ball screw system provides excellent seperation control of stencil for high quality solder paste printing
Programable speed control for both squeegee movement and stencil separation
Dual camera system for quick PCB alignment

Fully Automatic SMT Stencil Printer SP1200

The model SP1200 is a high-precision semi-automatic SMT stencil printer with very large pressure fields. All printers are compatible with standard SMT frames with sizes from 350x350mm to 1520x500mm.

Huge print area capability (up to 1200mmx400mm)
Vertical separation of stencil from PCB
- 4 corner ball screw system provides excellent seperation control of stencil for high quality solder paste printing
Programable speed control for both squeegee movement and stencil separation
Dual camera system for quick PCB alignment

MODEL: SP600 / SP600L / SP1200 (Semi / Fully Auto)

Download Brochure

Autotronik SP600 semi stencil printer

Autotronik SP1200 semi stencil printer

Semi / Fully Automatic SMT Stencil Printer BS1300 / BS1400

The Model BS1300 is a economic and accurate semi-automatic SMT stencil printer, suitable for small and medium volume production. Including the dual camera system with OPVA software, the ultra-fine pitch printing for 0.3 mm QFP IC is easy to obtain.

The Model BS1400 is a very accurate fully automatic SMT stencil printer. It includes a powerful AT-align automatic fiducial finding and PCB board offset adjustment system. After pressing the start key, the PCB alignment and printing process will be fully automatic, which is very suitable for precision batch printing.

MODEL: BS1300 / BS1400 (Semi / Fully Auto)

Precision Printing for 0.3 mm fine pitch QFP
Built in Overlay Pattern Vision Alignment (OPVA) Software
AT-align fully automatic fiducial finding and PCB board offset adjustment system (for Model BS1400)
Flexible Mounting Table for Single & Double side PCB
High Accuracy & Repeatable Printing
Double Squeegee with dual stroke control
Windows XP Software (control system)

Download Brochure

Automatic SMT Stencil Printer AP430 / AP430L / AP660

The model AP430 is a high-precision full-automatic SMT stencil printer with pressure field up to 450 x 350mm. All printers are compatible with standard SMT frames with sizes from 520 x 300mm to 736 x 736mm.

Dual-camera vision for fast PCB orientation
Print repeatability of ±0.008mm
Dual squeegees with dual-stroke control for efficient solder paste use
Flexible mounting for single- or double-sided boards
Fast job setup and changes
Excellent parallel separation of stencil and PCB with programmable speed control for well-defined prints
Accepts stencils size from min. 470 x 300 mm (AP430), 520 x 300 mm (AP430L), 736 x 736 mm (AP660) to max. 736 x 736 mm, 900 x 900mm (AP660)
Accommodates PCBs to 400 x 300 mm (AP430), 450 x 350 mm (AP430L), 600 x 600 mm (AP660)

Automatic SMT Inline Printer AP1200 / AP1500

The model AP1200 is a high-precision full-automatic SMT stencil printer with very large pressure fields (up to 1200x300mm).
All printers are compatible with standard SMT frames with sizes from 400x300mm to 1600x630mm.

Dual-camera vision for fast PCB orientation
Print repeatability of ±0.01mm
Dual squeegees with dual-stroke control for efficient solder paste use
Flexible mounting for single- or double-sided boards
Fast job setup and changes
Excellent parallel separation of stencil and PCB with programmable speed control for well-defined prints
Custom-designed clamping device holds long PCBs straight and suppresses the bending of flexible boards
Vacuum table holding fixture keeps PCB flat for best printing result Automatic conveyor width adjustment for convenient board loading
Accepts stencils size from min. 400 x 300 mm to max. 1600 x 300 mm (AP1200), 1900 x 300 mm (AP1500)
Accommodates PCBs to 1200 x 300 mm (AP1200), 1500 x 300 mm (AP1500)